Vibration Meter

Product Description

Technical specifications 

Vibration meter 

Low frequency range (overall measurement) 10 Hz to 1,000 Hz 

High frequency range (CF+ measurement) 4,000 Hz to 20,000 Hz 

Severity levels Good, Satisfactory, Unsatisfactory,UnacceptableVibration limit 50 g peak (100 g peak-peak)A/D converter 16-bitSignal to noise ratio 80 dBSampling rate Low frequency 20,000 Hz High frequency 80,000 HzReal time clock backup Coin batterySensorSensitivity 100 mV / g ± 10%Measurement range 0.01 g to 50 gLow frequency range (overall measurement) 10 Hz to 1,000 HzHigh frequency range (CF+ measurement) 4,000 Hz to 20,000 HzResolution 0.01 gAccuracy At 100 Hz ± 5 % of measured valueAmplitude unitsAcceleration g, m/sec2Velocity in/sec, mm/secDisplacement mils, mmInfrared thermometer (temperature measurement)Range -20 C to 200 C (-4 F to 392 F)Accuracy ± 2 C (4 F)Focal length Fixed, at 3.8 cm (1.5 in)External sensor (optional accessory)Frequency range 10 Hz to 1,000 HzBias voltage (to supply power) 20 V dc to 22 V dcBias Current (to supply power) Maximum 5 mAFirmwareExternal interfaces USB 2.0 (full speed) communicationData capacity Database on internal flash memoryUpgrade through USBMemory Up to 3,500 measurementsRadiated emissionElectrostatic discharge: Burst Standard EN 61000-4-2Electromagnetic interference Standard EN 61000-4-3RE Standard CISPR 11, Class AEnvironmentalOperating temperature -20 C to 50 C (-4 F to 122 F)Storage temperature -30 C to 80 C (-22 F to 176 F)Operating humidity 10 % to 95 % RH (non-condensing)Operating/Storage altitude Sea Level to 3,048 meters (10,000 feet)IP rating IP54Vibration limit 500 g peakDrop test 1 meterGeneral specificationsBattery type AA (2) Lithium Iron DisulfideBattery life 250 measurementsSize (L x W x H) 25.72 cm x 16.19 cm x 9.84 cm (10.13 in x 6.38 in x 3.875 in)Weight 1.16 kg (2.55 lb)Fluke Connect mobile appcompatible*YesConnectors USB mini-B 7-pin, external sensor jack (SMB connector) *